Moving Jaw Crusher and Fixed Jaw Crusher2020-04-03

Summary´╝ÜMoving jaw linings and fixed jaw linings are parts often damaged by jaw crushers. How can they be used longer? The jaw crusher is also called jaw crusher. Its w

Moving Jaw Crusher and Fixed Jaw Crusher

Moving jaw linings and fixed jaw linings are parts often damaged by jaw crushers. How can they be used longer? The jaw crusher is also called jaw crusher. Its working process is to move the jaw to attach a movable lining to make a compound pendulum movement, and form an angle with the fixed jaw to squeeze the material. From this, it can be seen that during the process of crushing the material, the jade lining board and the moving jaw lining board are constantly subject to friction between the materials. After a period of friction accumulation, the damage degree of the lining board reaches the limit, plus Depending on the operating methods of the staff, the lining board may last longer. If this happens, you need to replace the new accessories. If we pay more attention to the operation method of E-type stone breaker and the selection of E-type plate, it will not only prolong the use time of E-type plate, but also save time and reduce the later maintenance costs.

Jaw plate of jaw crusher

jaw crusher

To prolong the use time of the jade plate in the jaw crusher, the staff in the factory need to pay more attention to the operation method and the selection of the material of the accessories. In actual production, the staff must not only observe the feeding situation, but also observe some details of the jaw crusher, for example, when the screws of the jaw plate are loosened or damaged due to vibration, it is not simple to cause this phenomenon Tightening the bolts may cause excessive vibration of the jaw crusher due to an abnormal motor or other reasons. It is necessary to look at the essence through the surface, analyze the cause and repair it.

Secondly, if conditions permit, adding springs to the fixing bolts to dampen vibrations will also extend the service life of the E plate. When buying accessories, it is recommended to choose the original purchase and reasonable assembly method. The original purchase of the E plate has certain guarantees on the material and specifications. If the E plate is not worn in a large area, it can be adjusted or turned around for a period of time. Reducing replacement frequency and replacement costs.

The jaw crusher is often in the stage of coarse crushing. No matter from the operating environment or the degree of damage, the crushing pressure is greater than that of any medium and fine section. Therefore, we should properly treat the service life of wear-resistant parts and correctly extend the use time Desirable, but must be replaced in time to operate efficiently after being damaged too much.

Next : SBM SCM Ultrafine Powder Mill

Hot Sale

Submit Your Request Here