F5X Vibrating Feeder

Product Features: Super-heavy design and 4.5G of strong vibration intensity release better performances.

The feeder adopts a rod structure with a combination of wear-resistant steel and ordinary steel, which not only has a long life, high screening efficiency, low installation height, and small layout space. The structure design of the step height drop of the two-stage bar group can better remove fine materials and avoid repeated crushing, and greatly reduce the load of the crusher in the initial stage. Suitable for continuous feeding to primary jaw crusher, primary impact crusher and primary hammer crusher.

  • Input Size: 0-1500mm
  • Capacity: 500-1600TPH
  • Material: Granite, marble, basalt, limestone, quartz, pebble, copper ore, iron ore and so on

F5X Vibrating Feeder Working Principle

The F5X vibrating feeder uses a motor to drive the eccentric shaft located in the vibration excitation device. The shaft is connected via a gear to another shaft juxtaposed with it. When these two axes rotate, an exciting force is generated. This arrangement of the shaft allows the resulting stroke to slowly push the material from the feed end to the discharge end. At the same time, the material is sieved to make its particle size more uniform. Usually, the discharge end of the feeder is equipped with a bar screen. Through it, materials with a particle size smaller than the distance between the bars are separated, and materials with a larger particle size are conveyed into the crusher.


Technical data

Top Rated Products

Submit Your Request Here